1996 Rover Mini

Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust emissions - engine idle speed too high (8.2.1.2 (e))

Nearside Front Body panel insecure wing (6.2.1 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Oil leaking excessively from engine (8.4.1 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Battery insecure (1.9.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Lower Front suspension has excessive play in an outer ball joint (2.5.B.2a)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings subframe (6.1.B.2)

Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings door sill and rear quarter panel (6.1.B.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)

Rear fog lamp not working (1.3.2b)

both c v boots perished

both front inner wings rusty

both outer sills getting rusty

front exhaust rusty

n/s/f wheel bearing slight movement

rear subframe getting rusty

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear wheel bearing has excessive play (2.6.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Direction indicator not working (1.4.A.2c)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Shock absorber insecure (2.7.2b)

Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Headlamp not working on main beam (1.7.5a)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear fog lamp not working (1.3.2b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Front Brake pipe inadequately clipped (3.6.B.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Seat belt anchorage prescribed area is inadequately repaired (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear fog lamp insecure (1.3.2a)

Rear Brake pipe inadequately clipped (3.6.B.1)

Battery Insecure

rear silencer mounting missing - system supported

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Battery Insecure

Oil leak

Rear Silencer mounting missing - system supported

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Driver's seat insecure (6.2.A.1)

Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Headlamp aim too high (1.8)

Nearside Rear Body insecure and dangerous to other road users (6.1.B.1b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Driver's seat insecure (6.2.A.1)

Offside Front Driver's seat insecure (6.2.A.1)

Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is fractured (2.4.A.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Brake pipe inadequately clipped (3.6.B.1)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Parking brake lever has no reserve travel (3.1.6b)

Rear Brake pipe inadequately supported (3.6.B.1)

Service brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

battery insecure

rear exhaust system mounting missing

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Rear registration plate deteriorated (6.3.1d)

Nearside Front Direction indicator not working (1.4.A.2c)

Oil leak

Vehicle structure has slight corrosion (6.1.A.1)

Oil leak

Vehicle structure has slight corrosion (6.1.A.1)

Front registration plate character(s) likely to be misread (6.3.4b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Wheel nut(s) missing (4.2.A.1e) DANGEROUS

Oil leak

Vehicle structure has slight corrosion (6.1.A.1)

Front registration plate insecure (6.3.1b)

Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Headlamp aim too high (1.8)

Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front brake caliper securing device missing (3.5.1j) DANGEROUS

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offisde front tyre worn on outer edge

hand brake has little reserve travel.

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

hand brake has little reserve travel