MOT Status
ValidMileage
113,955 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Oil leak, but not excessive transmission (8.4.1 (a) (i))
Undertray not fully secure (8.1.1 (b) (i))
Nearside Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Oil leak, but not excessive engine (8.4.1 (a) (i))
all underbody corroded, subframes, suspension, not severely
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect Bulb (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced Sills/chassis (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component Rack (2.1.5 (a))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Suspension component corroded but not seriously weakened All (5.3.3 (b) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive All round (5.3.6 (a) (i))
Bad oil leak
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Play in steering rack inner joint(s) ()
Power steering component has slight seepage from a component Rack (2.1.5 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Suspension component corroded but not seriously weakened All round (5.3.3 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Central Stop lamp(s) not working (4.3.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Bad oil leak
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Play in steering rack inner joint(s) ()
Power steering component has slight seepage from a component Rack (2.1.5 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Suspension component corroded but not seriously weakened All round (5.3.3 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Bad oil leak
Central Non obligatory mirror damaged ()
Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Drop links (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear chassis badly corroded
Emissions not tested Exhaust blow` (8.2.2.2 (e))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member (6.1.1 (c) (i))
Nearside Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/inner arch (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Spring mount (6.1.1 (c) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill x2 (6.1.1 (c) (i))
Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch (6.1.1 (c) (i))
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))
Bad oil leak
Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Central mirror insecure/fell off
Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Drop links (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear chassis badly corroded
Brake lever has insufficient reserve travel Handbrake (1.1.2 (a))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions not tested Due to exhaust blow (8.2.2.2 (e))
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member x 4 holes (6.1.1 (c) (i))
Nearside Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End sill (5.3.6 (a) (i))
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mount/chassis leg (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End sill & wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End sill & wheel arch (5.3.6 (a) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Rear fog lamp does not face the rear (4.5.4 (a))
Central Mirror missing
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' bush (5.3.4 (a) (i))
Offside Front Inner Sill holed & corroded but not within 30 cm
Offside Front Window not working ?
Offside Rear Inner Wheel arch -Rear holed & corroded
Rear All seat belts not test due to rear of vehicle full
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' bushes (5.3.4 (a) (i))
Rear Coil spring corroded Both (5.3.1 (b) (i))
Rear fog lamp insecure (4.5.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Inner Vehicle structure has slight corrosion sill (6.1.B.2)
Offside Outer Vehicle structure has slight corrosion sill (6.1.B.2)
Central Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
bonnet stay missing
oil leak
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear fog lamp switch missing (1.3.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
bonnet stay missing
oil leak
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N798 CCF is a 2007 Mazda Bongo in Silver with a 2,490cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 60.7%.
Across all 2007 Mazda Bongo models, the average MOT pass rate is 66.1% with a typical mileage of 134,152 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N798 CCF, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 19 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of N798 CCF?
You can check the full history of N798 CCF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N798 CCF registered?
N798 CCF is a 2007 Mazda Bongo, first registered on 14 May 2007.
Is N798 CCF safe to buy?
The MOT history for N798 CCF shows 28 tests with a 60.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N798 CCF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N798 CCF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.