2001 Renault Master

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced front jacking points etc have corrosion (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced underside inc :both inner+outer sills,rear floor/rear wheelboxes showing corrosion/corroded (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play has play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated on LIMIT (5.3.4 (b) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension arm ball joint has slight play on limit (5.3.4 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Subframe mounting prescribed area is corroded but not considered excessive o/s+/s front (5.3.6 (a) (i))

Suspension spring mounting prescribed area is corroded but not considered excessive o/s+n/s rear corroded (5.3.6 (a) (i))

Tyre slightly damaged/cracking or perishing slight (5.2.3 (d) (ii))

clutch pedal rubber missing

exhaust heat shield loose

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door shut/sill (7.1.1 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid +leaking engine compartment (3.5 (a))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door shut (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced front jacking points etc have corrosion (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced underside inc :both inner+outer sills,rear floor/rear wheelboxes showing corrosion/corroded (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play has play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated on LIMIT (5.3.4 (b) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension arm ball joint has slight play on limit (5.3.4 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Subframe mounting prescribed area is corroded but not considered excessive o/s+/s front (5.3.6 (a) (i))

Suspension spring mounting prescribed area is corroded but not considered excessive o/s+n/s rear corroded (5.3.6 (a) (i))

Tyre slightly damaged/cracking or perishing slight (5.2.3 (d) (ii))

clutch pedal rubber missing

exhaust heat shield loose

Brake hose has slight corrosion to ferrule o/s front inners deteriorated (1.1.12 (f) (i))

Brake hose has slight corrosion to ferrule pipes to calipers etc (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material fronts (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner+outer sills,rear crossmember,rear suspension spring mountings,subframe mountings etc showing corrosion/corroded (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced jacking points corroded (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play has play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing all (5.2.3 (d) (ii))

n/s sill at front corroded+holed outside prescribed area

n/s washer poor+leaking under bonnet

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength by crossmember (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure to treaded area (5.2.3 (d) (ii)) DANGEROUS

Brake hose has slight corrosion to ferrule o/s front inners deteriorated (1.1.12 (f) (i))

Brake hose has slight corrosion to ferrule pipes to calipers etc (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material fronts (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner+outer sills,rear crossmember,rear suspension spring mountings,subframe mountings etc showing corrosion/corroded (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced jacking points corroded (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play has play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing all (5.2.3 (d) (ii))

n/s sill at front corroded+holed outside prescribed area

n/s washer poor+leaking under bonnet

Brake hose has slight corrosion to ferrule all fronts (1.1.12 (f) (i))

Brake hose slightly deteriorated fronts (1.1.12 (b) (ii))

Brake pipe corroded, covered in grease or other material all front (1.1.11 (c))

Brake rod corroded but not seriously weakened +cable grooper corroded (1.1.15 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner/outer siils,front o/s+/s jacking points/subframe mountings,rear crossmember/out riggers suspenson mountings etc showing corrosion/corroded (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced outer sill o/s etc corroded+holled outside prescribed area (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play has play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play slight (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

parking brake 17 %

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength jacking point area (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength n/s rear rear spring mounting various places (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule all fronts (1.1.12 (f) (i))

Brake hose slightly deteriorated fronts (1.1.12 (b) (ii))

Brake pipe corroded, covered in grease or other material all front (1.1.11 (c))

Brake rod corroded but not seriously weakened +cable grooper corroded (1.1.15 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner/outer siils,front o/s+/s jacking points/subframe mountings,rear crossmember/out riggers suspenson mountings etc showing corrosion/corroded (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced outer sill o/s etc corroded+holled outside prescribed area (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play has play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play slight (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

parking brake 17 %

Brake rod corroded but not seriously weakened +grooper (1.1.15 (b))

Front Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced inner+outer sills,rear crossmember,rear suspension mountings,front jacking points,subframe mounts etc showing corrosion/corroded (6.1.1 (c) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

clutch pedal rubber missing

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer provides insufficient washer liquid pipe leaking under bonnet (3.5 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake rod corroded but not seriously weakened +grooper (1.1.15 (b))

Front Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced inner+outer sills,rear crossmember,rear suspension mountings,front jacking points,subframe mounts etc showing corrosion/corroded (6.1.1 (c) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

clutch pedal rubber missing

Brake rod corroded but not seriously weakened +cable grouper rear (1.1.15 (b))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner+outer sills rear spring mountings,subframe mounting etc (6.1.1 (c) (i))

Nearside Rear Service brake binding but not excessively on limit (1.2.1 (f))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

clutch pedal rubber missing

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Brake rod corroded but not seriously weakened +cable grouper rear (1.1.15 (b))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner+outer sills rear spring mountings,subframe mounting etc (6.1.1 (c) (i))

Nearside Rear Service brake binding but not excessively on limit (1.2.1 (f))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

clutch pedal rubber missing

Brake pipe corroded, covered in grease or other material all fronts+flexi brake hose ferules (1.1.11 (c))

Brake rod corroded but not seriously weakened +cable grouper (1.1.15 (b))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Lower Suspension arm ball joint has slight play has play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

body panel holed

clutch pedal rubber missing

n/s floor holled

parking brake tall+parking brake performance o/s slightly poor

underside inc : inner+outer sills,rear spring mountings,crossmeber,out riggers,chassis,floors,front jacking points/subframe mounting etc showing corrosion/corroded

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear reflector likely to become detached (4.8.1 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Brake pad(s) less than 1.5 mm thick inner (1.1.13 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material all fronts+flexi brake hose ferules (1.1.11 (c))

Brake rod corroded but not seriously weakened +cable grouper (1.1.15 (b))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Lower Suspension arm ball joint has slight play has play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

body panel holed

clutch pedal rubber missing

n/s floor holled

parking brake tall+parking brake performance o/s slightly poor

underside inc : inner+outer sills,rear spring mountings,crossmeber,out riggers,chassis,floors,front jacking points/subframe mounting etc showing corrosion/corroded

Brake pipe corroded, covered in grease or other material all fronts (1.1.11 (c))

Brake rod corroded but not seriously weakened +cable grouper (1.1.15 (b))

Front Brake hose has slight corrosion to ferrule all at front+o/s corroded (1.1.12 (f) (i))

Suspension arm ball joint has slight play both lowers have play (5.3.4 (a) (i))

body panel corroded and holed

clutch pedal rubber missing

underside inc:sills,suspension mountings at rear,chassis,floors,crossmember,jacking points/subframe mounting etc showing corrosion/corroded

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake pipe corroded, covered in grease or other material all fronts (1.1.11 (c))

Brake rod corroded but not seriously weakened +cable grouper (1.1.15 (b))

Front Brake hose has slight corrosion to ferrule all at front+o/s corroded (1.1.12 (f) (i))

Suspension arm ball joint has slight play both lowers have play (5.3.4 (a) (i))

body panel corroded and holed

clutch pedal rubber missing

underside inc:sills,suspension mountings at rear,chassis,floors,crossmember,jacking points/subframe mounting etc showing corrosion/corroded

handbrake rod+cable grouper corroded

Brake hose has slight corrosion to ferrule all+both o/s on limit (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension arm ball joint has slight play both lowers (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play slight (5.3.4 (a) (i))

clutch pedal rubber missing

sills,floors,rear suspension mountings,chassis,rear crossmember etc showing corrosion/corroded/corroded on limit

slight engine smoke

washers slightly poor

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Front suspension has slight play in a lower suspension ball joint both (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint slight (2.5.B.1a)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

both inner+outer sills,seatbelt mountings,floors,rears suspension mountings,door steps,crossmember/chassis etc showing corrosion/corroded

centre+n/s front seatbelts slow to re-coil/poor

clutch pedal rubber missing

engine smoke

Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Suspension spring mounting prescribed area is excessively corroded o/s outer sill (2.4.A.3)

Suspension spring mounting prescribed area is excessively corroded o/s+n/s rear (2.4.A.3)

Windscreen washer provides insufficient washer liquid faulty (8.2.3)

Suspension spring mounting prescribed area is excessively corroded o/s+n/s rear spring hangers (2.4.A.3) DANGEROUS

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Front suspension has slight play in a lower suspension ball joint both (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint slight (2.5.B.1a)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

both inner+outer sills,seatbelt mountings,floors,rears suspension mountings,door steps,crossmember/chassis etc showing corrosion/corroded

centre+n/s front seatbelts slow to re-coil/poor

clutch pedal rubber missing

engine smoke

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

clutch pedal rubber missing

handbrake stiff

n/s+centre seatbelts slow to recoil(poor)

sills,door step,rear suspension mount,mount area,subframe,floor, etc showing corrosion/corroded

Front Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Front suspension has slight play in a lower suspension ball joint both (2.5.B.1a)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (slight) (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint on limit (2.5.B.1a)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. on limit (3.7.B.5b)

both o/s brakes binding slightly

clutch pedal ruber missing

door shuts+front subframe+mountings showing corroion/corroded

handbrake stiff+slightly poor

n/s +centre seatbelt slow to re-coil(poor)

o/s front b pillar area slightly damaged/corroded

o/s mirror temp repaired

sills,seatbelt mounting area,floor,rear suspension mounts+mounting area showing corrosion/corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Horn not working (1.6.2a)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Oil leak

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Oil leak

Nail in nearside front tyre

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

fuel tank staps corroded

Brake pedal anti-slip provision missing (3.3.A.1b)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Windscreen wiper blade deteriorated (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)