1996 Mazda Bongo Friendee

Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Steering box has seepage (2.1.1 (e) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced front inner sills both sides (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced front inner sills both sides (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive enlarged drain hole (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive enlarged drain hole (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Noise from n/s front suspension on road test. Not found on suspension test plates.

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Noise from n/s front suspension on road test. Not found on suspension test plates.

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

some corrosion to near side and off side inner and outer sills

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement 'D' bush (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Steering rack gaiter split (2.2.D.2d)

some corrosion to near side and off side inner and outer sills

Nearside Front Tyre worn close to the legal limit outer edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge and some perishing (4.1.E.1)

Offside Suspension component mounting prescribed area is inadequately repaired joint between outer sill panel and inner sill panel separated. (2.4.A.3)

Nearside Front Tyre worn close to the legal limit outer edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge and some perishing (4.1.E.1)

Nearside Front Anti-roll bar linkage insecure (2.4.G.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Battery insecure (1.9.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)