1996 Toyota MR2

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge worn close (5.2.3 (e))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge worn close (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

cooling radiator heavily deteriorated

engine has minor oil leak

underside of vehicle heavily covered in underseal

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Horn not working (7.7 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

cooling radiator heavily deteriorated

engine has minor oil leak

underside of vehicle heavily covered in underseal

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill (6.1.1 (c) (ii)) DANGEROUS

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill (6.1.1 (c) (ii)) DANGEROUS

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch (6.1.1 (c) (ii)) DANGEROUS

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor (6.1.1 (c) (ii)) DANGEROUS

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill (6.1.1 (c) (ii)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill (6.1.1 (c) (ii)) DANGEROUS

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch (6.1.1 (c) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

plastic under body tray fitted

steering rack rough when turned

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) DANGEROUS

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

nearside sill slightly corroded

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Vehicle structure has slight corrosion (6.1.A.1)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Vehicle structure has slight corrosion (6.1.A.1)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

covers underneath vehicle preventing inspection

o/s/f inner tyre edge smooth

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Brake back plate(s) securing device excessively deteriorated (3.5.1j)

Emissions not tested (7.0)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front front brake binding (3.7.B.1)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)