MOT Status
ValidMileage
154,203 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all under side corroded (6.1.1 (c) (i))
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outter sill x2 holes (6.1.1 (c) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 2 holes (6.1.1 (c) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all under side corroded (6.1.1 (c) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Anti-roll bar pin or bush excessively worn D-bush (5.3.4 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Upper wheel arch Excessively corroded (6.1.1 (c) (i))
Offside Front Headlamp light intensity severely reduced (4.1.4 (a))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Anti-roll bar pin or bush excessively worn D-bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Upper wheel arch Excessively corroded (6.1.1 (c) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Both front fog lamps inoperative
Front Suspension arm corroded but not seriously weakened Both front arms (5.3.3 (b) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced Under body corroded (6.1.1 (c) (i))
Nearside Front Direction indicator slightly discoloured (4.4.3 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Sill corroded (6.1.1 (c) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Rear underbody and multiple suspension components corroded (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central inner sill (5.3.6 (a) (i))
Front Subframe Corroded
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced Sill holed but not within 30cm of a mounting (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Rear Differential Corroded
Nearside Front Service brake binding but not excessively (1.2.1 (f))
all suspension components corroded
under body corrosion
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
all suspension components corroded
under body corrosion
rear outer wheel arches have surface corrosion
Nearside Front Headlamp incorrect colour (4.1.4 (a))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Headlamp incorrect colour (4.1.4 (a))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))
Offside Front tyre starting to split
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Rear Electrical wiring inadequately supported on exhaust (1.9.2a)
Offside Front tyre starting to split
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Body has slight corrosion inner sill (6.1.B.2)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Battery insecure both (1.9.1)
Nearside passenger door cannot be opened from outside the vehicle (6.2.B.1c)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Body has slight corrosion inner sill (6.1.B.2)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
both batterys insecure
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Child seat fitted not allowing full inspection of adult belt
Exhaust has part of the system slightly deteriorated (7.1.1a)
Oil leak
battery insecure
front and rear tyre sizes different
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Windscreen wiper blade insecure (8.2.2)
An item not tested (Manual)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.C.1b)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N843 PAE is a 2005 Mazda Bongo in White with a 1,998cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 57.1%.
Across all 2005 Mazda Bongo models, the average MOT pass rate is 66.8% with a typical mileage of 133,806 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N843 PAE, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 21 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of N843 PAE?
You can check the full history of N843 PAE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N843 PAE registered?
N843 PAE is a 2005 Mazda Bongo, first registered on 1 July 2005.
Is N843 PAE safe to buy?
The MOT history for N843 PAE shows 28 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N843 PAE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N843 PAE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.