1996 Honda Vt

Exhaust noisy (8.1.1 (a))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Bike been tested for day time use only, all the lights masked out

Registration plate does not conform to the specified requirements (0.1 (d))

Exhaust noisy (8.1.1 (a))

Rear Position lamp not working (4.2.1 (a))

Rear Registration plate insecure (0.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust noisy (7.1.2)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Wheel spoke slightly corroded. (4.2.1b)

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Throttle operating incorrectly (6.2.1f)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Wheel spoke slightly corroded. (4.2.1b)

Nearside Rear Drive chain worn but not considered excessive (6.2.1e)

Offside Front Exhaust is leaking but is not excessively noisey (7.1.1b)

1 drivers seat insecure † †2. front mudguard corroded

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Front All position lamps do not illuminate immediately when switched on (1.1.3a)

Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Registration plate deteriorated (6.3.1d)

1. fron t mudguard corroded † †2 . riders seat loose † †3. headlight aim not tested

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Front Front wheel bearings have excessive free play (2.3.5b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Riders seat insecure (6.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Front wheel bearings have excessive free play (2.3.5b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Riders seat insecure (6.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))