1996 Honda CA125

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Nearside Shock absorber has a light misting of oil (5.3.2 (b))

Registration plate slightly loose (0.1 (a))

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Nearside Shock absorber has a light misting of oil (5.3.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Registration plate slightly loose (0.1 (a))

Central Lower Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate slightly loose (0.1 (a))

Central Lower Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Registration plate slightly loose (0.1 (a))

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Front Wheel spoke slightly corroded (5.2.2 (d))

Headlamp aim too far to the right headlight dipping to right (4.1.2 (a))

Horn not working (7.7 (a) (ii))

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Front Wheel spoke slightly corroded (5.2.2 (d))

Drive chain slightly loose (6.2.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust is leaking but is not excessively noisey cross over pipe blowning (7.1.1b)

frame and wheels rusty

Exhaust is leaking but is not excessively noisey cross over pipe blowning (7.1.1b)

Headlamp aim too low mask fitted to head light (1.6)

frame and wheels rusty

slight cracking on rear tyrew side wall

Rear Registration plate insecure (6.3.1b)

slight cracking on rear tyrew side wall

Front Wheel spoke slightly corroded. (4.2.1b)

advise headlamp in very poor condition & needs replacing!

Headlamp aim too low (1.6)

advise chain worn & loose! advise replacement!

advise front brake pad worn low!

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

advise front tyre low & perished!

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))