1995 Mazda Bongo

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill by step (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing holed (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Fuel system component leaking excessively or a risk of fire Engine bay (6.1.3 (b) (ii)) DANGEROUS

Offside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Steering column flexible coupling is slightly deteriorated (2.2.2 (c))

Nearside Front small cracks in sidewall

Rear rear brake excessively fluctuating (3.7.B.3)

Nearside Front small cracks in sidewall

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm has slight play in a pin/bush bottom arm front bush (2.4.G.2)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

oil leak over engine

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Rear fog lamp not working (1.3.2b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm has slight play in a pin/bush bottom arm front bush (2.4.G.2)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

oil leak over engine

O/S/F seatbelt fraying.

Front registration plate incorrect (6.3.1a)

Nearside Front Anti-roll bar has excessive play in a pin/bush D bush (2.4.G.2)

Nearside Front Headlamp adversely affected by the operation of another lamp (1.7.5c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Anti-roll bar has excessive play in a pin/bush D bush (2.4.G.2)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar has excessive play in a pin/bush D bush (2.4.G.2)

Offside Front Anti-roll bar has excessive play in a pin/bush Lower arm rear bush. (2.4.G.2)

Offside Front Headlamp adversely affected by the operation of another lamp (1.7.5c)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Rear Anti-roll bar has excessive play in a pin/bush D bush (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a pin/bush Link arm (2.4.G.2)

Offside Rear Rear fog lamp emits a light other than red (1.3.2e)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill and floor (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Crack to N/S/R lamp unit.

N/S/R Tyre in poor condition worn on edges requires attention.

O/S/F Tyre in poor condition worn on inner edge requires attention.

O/S/F seatbelt fraying.

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both front tyres wearing on edges

n/s rear tyre wearing on edge

slight fraying to o/s front seat belt

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Front registration plate obscured (6.3.1d)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Offside Stop lamp not working (1.2.1b)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Inner Front brake disc slightly scored (3.5.1h)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)