1995 Rover Mini

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt split and insecure (2.1.3 (g) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

indictor switch insecure

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced footwell (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced footwell (6.1.1 (c) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock absorber (5.3.6 (a) (ii)) DANGEROUS

Indicator switch insecure (4.4.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced floor/sill (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced floor/sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced previous welded repairs (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Registration plate incorrect too small (0.1 (c))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/50r13 (5.2.3 (d) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/50r13 (5.2.3 (d) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / subframe (5.3.6 (a) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/50r13 (5.2.3 (d) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/50r13 (5.2.3 (d) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced previous welded repairs (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear position lamp(s) incorrect colour (1.1.A.3e)

outer sills weak and undersealled o/s @n/s Slight play o/s/f suspension joints

brake fluid level sensor has a broken wire

front side lamps have small white area with the rest showing blue

o/s and n/s rear lamps {side and stop} faded

o/s/r of outter sill weakend by corrosion

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front registration plate with character(s) which are not the correct height (6.3.4a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp does not operate immediately when selected on dipped beam (1.7.4a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Side repeater missing (1.4.A.2b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Upper Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp does not operate immediately when selected on dipped beam (1.7.4a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Side repeater missing (1.4.A.2b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

brake fluid level sensor has a broken wire

front side lamps have small white area with the rest showing blue

o/s and n/s rear lamps {side and stop} faded

o/s/r of outter sill weakend by corrosion

slight front brake imbalance

slight rear brake imbalance

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front registration plate with character(s) which are not the correct height (6.3.4a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

font side lamps o/s and n/s very dim and fitted in modified lamps

front spot lamps used as main beam headlamps original lamps not working

o/s/r of outter sill weakend by corrosion

Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front suspension has slight play in an outer ball joint (2.5.B.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

n/s/f disc backplate missing

Offside Brake linkage has restricted free movement (3.5.1k)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

slight play o/s/f top ball joint

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Steering rack gaiter deteriorated (2.2.D.2d)