1996 Mazda 323

Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear tyre below limit

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Windscreen cracked along bottom but not obstructing drivers view of road.

Battery insecure (1.9.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Windscreen cracked along bottom but not obstructing drivers view of road.

Shock absorber has a light misting of oil (2.7.3)

windscreen cracked along bottom but not affecting drivers view

Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Shock absorber has a light misting of oil (2.7.3)

windscreen cracked along bottom but not affecting drivers view

metal brake pipes corroding (1) both to rear wheel cylinders (2) 1X front to rear near fuel tank

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

metal brake pipes corroding (1) both to rear wheel cylinders (2) 1X front to rear near fuel tank

nearside rear wheel nuts all fitted wrong way round

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front constant velocity joint is slightly worn (2.5.C.1b)

nearside rear outer sill corroding

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear coil spring cracked (2.4.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

nearside rear outer sill corroding

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc slightly pitted (3.5.1h)

Offside Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)