2005 Mazda Bongo

Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced arch/sill (6.1.1 (c) (i))

Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill/step (6.1.1 (c) (i))

Rear Passenger seat(s) missing at time of test ()

unable to gain oil temp reading

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt both link ball joint dust covers (5.3.4 (b) (ii))

Offside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced arch/sill (6.1.1 (c) (i))

Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill/step (6.1.1 (c) (i))

Rear Passenger seat(s) missing at time of test ()

unable to gain oil temp reading

Body has slight corrosion (6.1.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front suspension components corroded

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear suspension components corroded

Vehicle structure has slight corrosion (6.1.A.1)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Rear registration plate deteriorated (6.3.1d)

Body has slight corrosion (6.1.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front suspension components corroded

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear suspension components corroded

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Rear fog lamp not working (1.3.2b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced lense (1.7.5a)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced lense (1.7.5a)

Coolant leak

Under-trays fitted obscuring some underside components

Vehicle structure has slight corrosion (6.1.A.1)

corrosion on rear wheel arches

hole corroded in offside front inner sill just outside subframe prescribed area

possible leak from nearside rear hub seal

Front Brake pad(s) wearing thin (3.5.1g)

Vehicle structure has slight corrosion (6.1.A.1)

nearside wiper blade split on end

Items removed from driver's view prior to test

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

centre stop lamp not working

nearside front inner sill corroded just outside prescribed areas

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Items removed from driver's view prior to test

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

centre stop lamp not working

nearside front inner sill corroded just outside prescribed areas

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Passenger seat(s) missing at time of test

Rear Brake pad(s) wearing thin (3.5.1g)

nearside front inner sill corroded

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)