MOT Status
ValidMileage
163,645 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Oil leak, but not excessive Diff leaking (8.4.1 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Oil leak, but not excessive Diff leaking (8.4.1 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement d-link (5.3.4 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Nearside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced Radiator cross member (6.1.1 (c) (i))
Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced Rear Quarter (6.1.1 (c) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" Bush (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced Rear Quarter (6.1.1 (c) (i))
Exhaust emissions likely to be affected by an exhaust leak Rear exhaust box holes (8.2.2.1 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Nearside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced Radiator cross member (6.1.1 (c) (i))
Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced Rear Quarter (6.1.1 (c) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" Bush (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced Rear Quarter (6.1.1 (c) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pipe corroded, covered in grease or other material ns and os (1.1.11 (c))
Front Fluid leak, but not excessive diff (8.4.1 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside outer sills corroded
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside outer sills corroded
various chassis corrosion
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Brake pipe corroded, covered in grease or other material o/s & n/s (1.1.11 (c))
Front Oil leak, but not excessive differential (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Coil spring corroded o/s & n/s (5.3.1 (b) (i))
o/s & n/s outer sills corroded
various chassis & suspension corrosion.
Heavy surface corrosion to all suspension components
Heavy surface corrosion to both rear coil springs
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive Front differential (8.4.1 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
corrosion on components on under side of vehicle
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Electrical wiring insecure under centre of vehicle (4.11 (a) (i))
Fluid leak, but not excessive coolant (8.4.1 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting by exhaust mounting and tow bar mount (6.2.2 (d) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Coolant leak ()
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement front trailing arm bush worn (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Outer Body not fully secure corner out rigger corroded though (6.2.2 (a) (i))
Offside Rear Body has slight corrosion inner wheel arch rear of wheel (6.1.B.2)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre of inner sill (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre of inner sill (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Rear Body has slight corrosion inner wheel arch rear of wheel (6.1.B.2)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sills (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Body has slight corrosion (6.1.B.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
coil spring corroded (2.4.C.1b)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Body has slight corrosion (6.1.B.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
coil spring corroded (2.4.C.1b)
Offside Side repeater not working (1.4.A.2c)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
nearside centre inner sill corroded (not a prescribed area)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
nearside centre inner sill corroded (not a prescribed area)
offside centre inner sill excessively corroded and holed (not a prescribed area)
Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (4.1.E.2a)
Nearside Rear Tyre tread depth below requirements of 1.0mm (4.1.E.2b)
Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (4.1.E.2a)
Offside Rear Tyre tread depth below requirements of 1.0mm (4.1.E.2b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.2a)
Offside Front Tyre worn close to the legal limit (4.1.E.2a)
CROSSMEMBER CORRODING NOT YET HOLED INNER SILLS CORRODING NOT YET HOLED
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N914 UAA is a 1995 Mazda MPV in Green with a 1,998cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 62.5%.
Across all 1995 Mazda MPV models, the average MOT pass rate is 64.6% with a typical mileage of 135,780 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying N914 UAA, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 31 years old, this Mazda MPV is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N914 UAA?
You can check the full history of N914 UAA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N914 UAA registered?
N914 UAA is a 1995 Mazda MPV, first registered on 31 December 1995.
Is N914 UAA safe to buy?
The MOT history for N914 UAA shows 32 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N914 UAA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N914 UAA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.