MOT Status
ValidMileage
225,713 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material Both Sides All Undersealed (1.1.11 (c))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Rear Both Sides Hub Seals Damp
Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wing Both Sides (6.1.1 (c) (i))
Front Windscreen wiper does not clear the windscreen effectively Both Sides (3.4 (b) (ii))
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wing By Strut Tower (marked in Yellow) (6.1.1 (c) (i))
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked in Yellow (6.1.1 (c) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer Sill (All Marked In Yellow) (6.1.1 (c) (i))
Offside Rear Rear fog lamp missing (4.5.1 (a) (ii))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Centre Of Outer Sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced Centre of Sill Corroded (marked in Yellow) (6.1.1 (c) (i))
Rear Slight Weep from Hub Seal Both Sides
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Anti-roll bar linkage corroded but not seriously weakened both sides (5.3.3 (b) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
both inner sills corroded
offside rear axle oil seal slight leak
rear suspension parts corroded
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Anti-roll bar linkage corroded but not seriously weakened both sides (5.3.3 (b) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
both inner sills corroded
offside rear axle oil seal slight leak
rear suspension parts corroded
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut mounting (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut mounting (5.3.6 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge also perished (5.2.3 (e))
Offside Rear axle oil seal slight leak
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear suspension parts corroded
Emissions not tested (8.2.2.2 (e))
Exhaust emissions likely to be affected by an exhaust leak cenetr pipe (8.2.2.1 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut mounting (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut mounting (5.3.6 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge also perished (5.2.3 (e))
Offside Rear axle oil seal slight leak
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear suspension parts corroded
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front tyre tread stepping
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front tyre tread stepping
Offside Rear Tyre worn close to legal limit/worn on edge also perishing (5.2.3 (e))
front x member and rad support corroded
suspension brackets on axle slight corroded
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength trailing arm mpunt (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front tyre tread stepping
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front tyre tread stepping
Offside Rear Tyre worn close to legal limit/worn on edge also perishing (5.2.3 (e))
front x member and rad support corroded
suspension brackets on axle slight corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive strut mounting (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut mounting (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
all suspension mounts on rear axle corroded
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch (6.1.1 (c) (i))
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill 2 places (6.2.2 (d) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch (6.1.1 (c) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch (6.1.1 (c) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch (5.3.6 (a) (i))
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch (6.1.1 (c) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability roll bar bracket broken off (5.3.3 (a) (ii)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive strut mounting (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut mounting (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
all suspension mounts on rear axle corroded
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Metal parts of flexible brake hose rusted
Central Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Auto box pipes to cooler leaking.
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
corrosion forming at o/s inner sill to floor pan marked yellow
Front Brake pad(s) wearing thin (3.5.1g)
rear inner wheel archs are rusty
surface rust on o/s/r sill
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear fog lamp missing (1.3.2a)
Front Brake pad(s) wearing thin (3.5.1g)
rear inner wheel archs are rusty
surface rust on o/s/r sill
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
f/n/s tyre worn uneven
Parking brake lever has little reserve travel (3.1.6b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: efficiency below requirements (3.7.C.1b) DANGEROUS
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Stop lamp not working (1.2.1b)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N91 BRR is a 2007 Mazda Bongo in Green with a 2,490cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 57.1%.
Across all 2007 Mazda Bongo models, the average MOT pass rate is 66.1% with a typical mileage of 134,152 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N91 BRR, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 19 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of N91 BRR?
You can check the full history of N91 BRR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N91 BRR registered?
N91 BRR is a 2007 Mazda Bongo, first registered on 1 February 2007.
Is N91 BRR safe to buy?
The MOT history for N91 BRR shows 28 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N91 BRR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N91 BRR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.