1995 Mazda Bongo

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Emissions not tested exhaust leak (8.2.2.2 (e))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Front Registration plate insecure (0.1 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Offside Rear Seat belt buckle missing rear most (7.1.2 (d))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front fog lamp not working

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear position lamp lense damaged

Nearside Rear wheel arch corroded

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake hose has slight corrosion to ferrule on axle (1.1.12 (f) (i))

Rear Towbar slightly corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i))

Rear fog lamp lens defective which has no effect on emitted light (4.5.1 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive rest of front crossmember (5.3.6 (a) (i))

bonnet stay missing

o/s/r and n/s/r body seams / sills corroded and holed but not in a prescribed area

service brake only just passed 52 %

Front Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Nearside Front Tyre worn close to the legal limit and perished (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive both sides (5.2.6)

inner sills holed and corroded

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front registration plate missing (6.3.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake lever has no reserve travel (3.1.6b)

Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Front Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Nearside Front Tyre worn close to the legal limit and perished (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive both sides (5.2.6)

inner sills holed and corroded

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake lever has little reserve travel (3.1.6b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

all suspension components corroded

n/s/r sill and wheel arch corroded

o/s/r sill holed and corroded

Battery insecure (1.9.1)

Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

all suspension components corroded

n/s/r sill and wheel arch corroded

o/s/r sill holed and corroded

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear fog lamp not working (1.3.2b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

o/s &n/s wiperblades split

Front Brake lining(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Rear fog lamp switch missing (1.3.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)