MOT Status
ExpiredMileage
248,708 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sills holed full sill (5.3.6 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills holed inner and outer (5.3.6 (a) (i))
front brake discs worn
oil pressure light flickering
roof open light on
suspension components corroded
Offside Front Outer cv boot repaired
vehicle chassis and inner sills welded under sealed
Nearside Rear Vehicle structure modified such that structural rigidity is significantly reduced cross member (6.1.1 (d) (i))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Headlamp beam image cloudy
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Anti-roll bar insecurely attached D clamp snapped (5.3.3 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Headlamp beam image cloudy
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Coolant leak
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
front cross member slightly corroded
offside inner sill corroded
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
front cross member slightly corroded
offside inner sill corroded
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Lower Steering pivot point has excessive play (2.2.B.1g)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Steering rack gaiter split (2.2.D.2d)
Centre Brake pipe slightly corroded (3.6.B.2c)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear fog lamp not working (1.3.2b)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
front driving lamps and front fog lamps defective
Nearside Rear brake disc contaminated by brake fluid (3.5.1h)
BOTH REAR TYRES PERISHED AND SPLITTING. NEAR SIDE HAS DEEP SPLIT AROUND OUTER EDGE (NOT EXPOSING REINFORCING AT PRESENT TIME)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N942 LEX is a 2005 Mazda Bongo in Green with a 2,490cc diesel engine. This vehicle has been through 33 MOT tests with a personal pass rate of 63.6%.
Across all 2005 Mazda Bongo models, the average MOT pass rate is 66.8% with a typical mileage of 133,806 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N942 LEX, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 21 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of N942 LEX?
You can check the full history of N942 LEX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N942 LEX registered?
N942 LEX is a 2005 Mazda Bongo, first registered on 27 May 2005.
Is N942 LEX safe to buy?
The MOT history for N942 LEX shows 33 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N942 LEX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N942 LEX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.