2007 Mazda Bongo

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded cross over (1.1.11 (c))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

exhaust back box sticking out past rear bumper

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting central outer sill (6.2.2 (d) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

exhaust back box sticking out past rear bumper

Integral body structure is corroded but structural rigidity is not significantly reduced rest of car (6.1.1 (c) (i))

Rear rear exhaust back box sticking out past bumper hot when car is running

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle inner sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle inner sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp does not emit a steady red light (4.5.4 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced rest of car (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear rear exhaust back box sticking out past bumper hot when car is running

Body has slight corrosion (6.1.B.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Body has slight corrosion (6.1.B.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)

Offside Rear coil spring corroded (2.4.C.1b)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

corrosion to all underbody

Nearside front brake binding (3.7.B.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside front brake binding (3.7.B.1)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

corrosion to all underbody

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

bumper removed at time of mot

o/s/f t/r/e rubber perished

rear crossmember corroded

Horn not working (1.6.2a)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

SLIGHT PLAY IN D bushes

bumper removed at time of mot

o/s/f t/r/e rubber perished

rear crossmember corroded

Fuel system component leaking (7.2.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

nearside front inner wing holed below headlamp

Under-trays fitted obscuring some underside components

inner+outer sills underseald

Nearside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear fog lamp emits a light other than red (1.3.2e)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS

Rear fog lamp deteriorated, but still visible from a reasonable distance (1.3.2d)

Side repeater obscured but not more than 50% (1.4.A.2d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Steering rack gaiter split (2.2.D.2d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Power steering component(s) leaking (2.3.3b)

Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)