2004 Mazda Bongo

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

corrosion to - chassis rails, & sills

parking brake effiency only just met

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

corrosion to - chassis rails, & sills

parking brake effiency only just met

Nearside Integral body structure is repaired but structural rigidity is not significantly reduced inner sill (6.1.1 (d) (i))

Offside Integral body structure is repaired but structural rigidity is not significantly reduced inner sill (6.1.1 (d) (i))

Suspension component mounting repair covered in underseal all suspension covered with underseal (5.3.6 (a) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 30cm of suspension mounts (6.2.2 (d) (i))

Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced body mount (6.1.1 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 30cm of suspension mounts (6.2.2 (d) (i))

Nearside Integral body structure is repaired but structural rigidity is not significantly reduced inner sill (6.1.1 (d) (i))

Offside Integral body structure is repaired but structural rigidity is not significantly reduced inner sill (6.1.1 (d) (i))

Suspension component mounting repair covered in underseal all suspension covered with underseal (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Engine Coolant leaking

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner wheel arch, holed

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Radiator support corroded

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner floor (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

o/s/r fog starting to show white light

Fluid leak harmful to the environment or a risk to other road users Fuel leak at engine (8.4.1 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both front outriggers. (6.1.1 (c) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both rear outriggers (6.1.1 (c) (i))

Windscreen wiper does not clear the windscreen effectively Both front wiper blades. (3.4 (b) (ii))

Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Chassis holed (6.1.B.2)

Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering cross member holed (6.1.A.1)

Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Crossmember holed (6.1.B.2)

Rear fog lamp missing (1.3.2a)

Rear Seat belt retracting mechanism defective Rear stalks missing x3 (5.2.5b) DANGEROUS

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Outrigger (6.1.B.2)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

Power steering component(s) leaking (2.3.3b)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp emits a light other than red (1.3.2e)

Registration plate lamp not working (1.1.C.1d)

advise.cluth slipping

Front panel corroded around towing eye

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear fog lamp slightly discoloured (1.3.2e)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front panel corroded around towing eye

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear fog lamp slightly discoloured (1.3.2e)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Corrosion alround vehicle

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Corrosion alround vehicle

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear fog lamp emits a light other than red (1.3.2e)

Registration plate lamp not working (1.1.C.1d)

Offside Outer Vehicle structure has slight corrosion (6.1.B.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear fog lamp missing (1.3.2a)

Offside Registration plate lamp not working (1.1.5c)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear fog lamp missing (1.3.2a)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)