2005 Lexus IS200

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Service brake excessively binding caliper seized (1.2.1 (f))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Headlamp has a product on the lens but not seriously reducing light output Both Sides Opaque (4.1.4 (b))

Offside Front Inner Brake pad(s) wearing thin @ 2mm (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre worn close to legal limit/worn on edge Both Sides @ 2.5 mm (5.2.3 (e))

Suspension arm corroded but not seriously weakened ALL Front and Rear (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both Sides (1.1.14 (a) (ii))

Headlamp lens slightly defective Both Sides opaque (4.1.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened ALL Front and Rear (5.3.3 (b) (i))

Exhaust has a major leak of exhaust gases tail pipe and rear silencer (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear Service brake effort inadequate at a wheel Both Sides (1.2.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened Both Sides (1.1.14 (a) (ii))

Headlamp lens slightly defective Both Sides opaque (4.1.1 (b) (i))

Low coolant on pre check (radiator)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both Sides (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin Both Sides (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened ALL Front and Rear (5.3.3 (b) (i))

Nearside Front Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake pad(s) wearing thin Both Sides @ 4mm (1.1.13 (a) (ii))

Front Suspension arm corroded but not seriously weakened Both Sides (5.3.3 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both Sides (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin Both Sides @ 4mm (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened Both Sides (5.3.3 (b) (i))

Sub-frame pin or bush worn but not resulting in excessive movement ALL 4 mounting bushes perished (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills Both Sides corroded (5.3.6 (a) (i))

Front Brake pad(s) wearing thin Both Sides @ 4mm (1.1.13 (a) (ii))

Front Suspension arm corroded but not seriously weakened Both Sides (5.3.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both Sides (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin Both Sides @ 4mm (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened Both Sides (5.3.3 (b) (i))

Sub-frame pin or bush worn but not resulting in excessive movement ALL 4 mounting bushes perished (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills Both Sides corroded (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre tread depth below requirements of 1.6mm Both Sides (5.2.3 (e))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Position lamp not working Both Sides (4.2.1 (a) (ii))

Offside Rear Brake pad(s) wearing thin below 2mm (1.1.13 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both Sides Corroded (1.1.14 (a) (ii))

Offside Rear Brake pad(s) wearing thin below 2mm (1.1.13 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both Sides Corroded (1.1.14 (a) (ii))

Windscreen wiper does not clear the windscreen effectively Both Sides (3.4 (b) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both Sides (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both Sides (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin Both Sides (1.1.13 (a) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both Sides (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both Sides (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin Both Sides (1.1.13 (a) (ii))

Rear Exhaust has a major leak of exhaust gases Silencer box (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill area (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill area (2.4.A.3)

Nearside Front Tyre worn close to the legal limit 2.5mm but wearing on inner edge. 215/45/17 (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 3mm but wearing on inner edge. 215/45/17 (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)