2006 Mazda Bongo

Battery leaking (4.13 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber mount area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mounting and trailing arm mounting area (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe mount and suspension arm mount area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mounting area (5.3.6 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Shock absorber top mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Top shock absorber mounting (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D-bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

various non component corrosion

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Anti-roll bar pin or bush excessively worn both rear (5.3.4 (a) (i))

Fuel system component leaking pump area (6.1.3 (b) (i))

Headlamp aim projected beam image is obviously incorrect both front (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Both front brakes binding slightly

Spare tyre defective ()

Both front brakes binding slightly

Rear fog lamp does not emit a steady red light (4.5.4 (a))

Spare tyre defective ()

Both front tyres worn to 3mm

Both headlamps opache

Coolant leak ()

Oil leak ()

Some prescribed but non excessive corrosion

Various non prescribed corrosion

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Exhaust has a major leak of exhaust gases back box (7.1.2)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill panel (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded n/s/r chassis in arch (2.4.A.3)

Nearside Rear brake disc contaminated by oil (3.5.1h)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear fog lamp missing (1.3.2a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Both front tyres worn to 3mm

Various prescribed but non excessive corrosion

coolant leak

headlamps opache

oil leak

various non prescribed corrosion

various non perscribed corrosion

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

various non perscribed corrosion

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nail in nearside front tyre

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nail in nearside front tyre

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Headlamp aim too high (1.8)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp aim too high (1.8)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not working on main beam (1.7.5a)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

nearside front wiper blade is split

oil leaks

spare wheel in poor condition

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)