1996 Honda CB500

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Tyre fouling another component mudguard (5.2.3 (f))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Drive chain excessively tight, so that it is likely to fail chain links seized (6.1.7 (k) (ii)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle not retuning when released (6.2.7 (a) (ii)) DANGEROUS

Rear Road spring corroded x 2 (5.3.1 (b) (i))

Damp around left hand fork seal

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake excessively binding disc rubbing on caliper carrier (1.2.1 (f))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear tyre uneven wear

Front Brake excessively binding (1.2.1 (f))

Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear tyre uneven wear

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering headbearing has slight free play (2.2.2)

Steering movement slightly 'notchy' (2.2.1b)

Front Floor brake test indicates a sticking brake (3.3.C2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Drive chain excessively tight (6.2.1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Offside Front shock absorber has light misting of stanchion (2.3.3)