2005 Mazda Bongo

Nearside Inner sill surface rust surface rust

Offside Inner sill surface rust

Offside Outer sill surface rust

Oil leak, but not excessive (8.4.1 (a) (i))

Fluid leak, but not excessive diesel leak (8.4.1 (a) (i))

General underbody corrosion to chassis, subframes and suspension

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear chassis corroded

Offside inner sill badly corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Inner Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Fluid leak, but not excessive diesel leak (8.4.1 (a) (i))

General underbody corrosion to chassis, subframes and suspension

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear chassis corroded

Offside inner sill badly corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear tyre sidewall damaged

Offside inner sill corroded

Play in both front suspension arm bushes

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis outrigger (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear tyre sidewall damaged

Offside inner sill corroded

Play in both front suspension arm bushes

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

OSR chassis shows signs of corrosion

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Fuel pipe leaking (6.1.3 (b) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

OSR chassis shows signs of corrosion

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Horn not working (7.7 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

n/s/f tyre wearing on edge

Horn not working (1.6.2a)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded inner sill x2 (2.4.A.3)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Suspension component mounting prescribed area is excessively corroded inner sill x2 (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded outer sill x3 (2.4.A.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Rear fog lamp not working (1.3.2b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Nail in tyre ()

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

n/s/f tyre wearing on edge

Vehicle structure has slight corrosion (6.1.B.2)

o/s and n/s front and rear brake discs slightly corroded

nearside rear tyre cracking

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

nearside rear tyre cracking

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

nearside front brake binding slightly

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

nearside front brake binding slightly

Horn not working (1.6.2a)

Registration plate lamp not working (1.1.5c)

Horn not working (1.6.2a)

Nearside Stop lamp not working (1.2.1b)

Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

corrosion around exhaust flexible pipe slight leak