MOT Status
ExpiredMileage
131,053 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Upper Drag link end ball joint has excessive play (2.2.B.1f)
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Registration plate lamp not working (1.1.C.1d)
Offside rear brake juddering severely (3.7.A.5b)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Direction indicator not working (1.4.A.2c)
Nearside Rear coil spring fractured (2.4.C.1a)
Nearside rear brake binding (3.7.B.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
front brake discs slightly pitted
rear brakediscs scored
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Rear wheel bearing has excessive play (2.6.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)
Exhaust system not adequately supported (7.1.1)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear position lamp(s) not in a clean condition and function impaired (1.1.4a)
Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear coil spring fractured (2.4.C.1a)
Offside Stop lamp not working (1.2.1b)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Stop lamp not working (1.2.1b)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
How Reliable is the Audi A4?
Based on 7,096,957 MOT tests across 571,801 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N994 CNC is a 1996 Audi A4 in Red with a 1,595cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 1996 Audi A4 models, the average MOT pass rate is 62.5% with a typical mileage of 131,704 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi A4 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 231,238 recorded failures. If you're considering buying N994 CNC, it's worth having these areas checked by a mechanic before committing.
The Audi A4 typically stays on UK roads for around 31 years. At 30 years old, this Audi A4 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N994 CNC?
You can check the full history of N994 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N994 CNC registered?
N994 CNC is a 1996 Audi A4, first registered on 22 May 1996.
Is N994 CNC safe to buy?
The MOT history for N994 CNC shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N994 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N994 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.