MOT Status
ValidMileage
175,261 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Bonet stay not secured
General corrosion
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Trailing arm bush (5.1.2 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced Not near vital components (6.1.1 (c) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Trailing arm bush (5.1.2 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Welding repairs + underseal
Fluid leak harmful to the environment or a risk to other road users COOLANT (8.4.1 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (3 marked areas ) (6.1.1 (c) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
Bonet stay not secured
General corrosion
Multiple welding repairs carried out
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Trailing arm bush (5.1.2 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Not near any components (6.1.1 (c) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Trailing arm bush (5.1.2 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Headlamp has a product on the light source but not seriously reducing light output both (4.1.4 (b))
Front Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))
Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Crash bar (6.1.1 (c) (i))
Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill marked (6.2.2 (d) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Body panel corroded and likely to cause injury Wheel arch + Body mounting area (6.2.1 (a) (i))
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill marked (6.2.2 (d) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Body panel corroded and likely to cause injury Wheel arch + body mounting area (6.2.1 (a) (i))
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Quarter panel marked (6.2.2 (d) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill marked (5.3.6 (a) (i))
Nearside Front Tyre has ply or cords exposed Cracking + Low tread (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed + Cracking + Worn on edge (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Anti-roll bar pin or bush likely to become detached D-Bush snapped (5.3.4 (a) (ii)) DANGEROUS
Front Headlamp aim too high Both sides (4.1.2 (a))
Front Headlamp has a product on the lens but not seriously reducing light output Both sides (4.1.4 (b))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
General corrosion
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened INNER FACE (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
n/s/r outer sill corroded
n/s/r wheel arch corroded
o/s/r outer sill corroded
o/s/r wheel arch corroded
Oil leak, but not excessive engine (8.4.1 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Registration plate insecure (0.1 (a))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
exhaust corroding
front brake discs worn & pads low
long pull to handbrake
rear brake discs worn & pads low
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
exhaust corroding
front brake discs worn & pads low
long pull to handbrake
rear brake discs worn & pads low
exhaust corroding
exhaust corroding
front b rake discs worn
long pull to handrake
rear brake discs worn
exhaust corroding
front brake discs pitted
long pull to handbrake
nearside mirror damaged
rear brake discs pitted
rear brake pads worn
Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
front brake discs pitted
rear brake discs pitted
Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Registration plate lamp not working (1.1.C.1d)
front brake discs pitted
rear brake discs pitted
Front brake disc slightly pitted (3.5.1h)
Front brake disc slightly pitted (3.5.1h)
Rear brake disc slightly pitted (3.5.1h)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
front tyres slightly worn on edge
n/s front spot light
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N998 XTA is a 1995 Mazda Bongo in Red with a 2,490cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 1995 Mazda Bongo models, the average MOT pass rate is 64.5% with a typical mileage of 135,909 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N998 XTA, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 31 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N998 XTA?
You can check the full history of N998 XTA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N998 XTA registered?
N998 XTA is a 1995 Mazda Bongo, first registered on 31 December 1995.
Is N998 XTA safe to buy?
The MOT history for N998 XTA shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N998 XTA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N998 XTA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.