MOT Status
ValidMileage
111,982 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Coil spring corroded Both (5.3.1 (b) (i))
engine bay and under body covers fitted obscuring testable items from view
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases clamp (6.1.2 (a))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Front Exhaust mounting defective (6.1.2 (a))
Offside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
engine bay and under body covers fitted obscuring testable items from view
engine bay and under body covers fitted obscuring testable items from view
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
engine bay and under body covers fitted obscuring testable items from view
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Shock absorbers has a slightly worn bush Lower Bush (5.3.2 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords 155/65/14 75T (5.2.3 (d) (i))
Offside Rear Shock absorbers has a slightly worn bush Lower Bush (5.3.2 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Suspension component corroded but not seriously weakened Axle Beam (5.3.3 (b) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Rear Brake pipe excessively corroded Front to Rear X2 (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Shock absorbers has a slightly worn bush Lower Bush (5.3.2 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords 155/65/14 75T (5.2.3 (d) (i))
Offside Rear Shock absorbers has a slightly worn bush Lower Bush (5.3.2 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Suspension component corroded but not seriously weakened Axle Beam (5.3.3 (b) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded (6.2.2 (d) (i))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits probley due to exaust leak (7.3.D.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim too low (1.8)
Offside Rear fog lamp not working (1.3.2b)
both front tyres 3mm
front pads very low
minor blow from last joint
both rear tyres 5yrs old
minor blow on last joint
nearside rear tyre 3mm
both front tyres 2-3 mm
Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Registration plate lamp not working (1.1.C.1d)
both front tyres 2-3 mm
Emissions not tested (7.0)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Headlamp aim too low (1.8)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear fog lamp not working (1.3.2b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
NA06 MXP is a 2006 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying NA06 MXP, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of NA06 MXP?
You can check the full history of NA06 MXP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was NA06 MXP registered?
NA06 MXP is a 2006 Toyota Aygo, first registered on 10 April 2006.
Is NA06 MXP safe to buy?
The MOT history for NA06 MXP shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does NA06 MXP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on NA06 MXP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.