2008 Toyota Aygo

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Rubber bushes perishing. (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material Covered in grease. (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Rubber bushes perishing. (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material Slight corrosion. (1.1.11 (c))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Rubber bushes perishing. (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material Covered in grease. (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Rubber bushes perishing. (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material Slight corrosion. (1.1.11 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front ns side repeater lense

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

reverse lamps inop

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill corroded (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front ns side repeater lense

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

reverse lamps inop

Rear reverse lamp inop

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Rear reverse lamp inop

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

reverse lamp inop

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen washer provides insufficient washer liquid (3.5 (a))

reverse lamp inop

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Body component damaged and likely to cause injury side repeater lens missing,sharp prs (6.2.1 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to the legal limit on outer edge (4.1.E.1)

Front Windscreen washer provides insufficient washer liquid refilled (8.2.3)

Nearside Rear Tyre worn close to the legal limit on outer edge (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)

front brake disc wear

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

front brake disc wear

front n/s tyre wear on outer edge

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

o/s and n/s front brake discs wear.

o/s rear tyre cracks in tread.