MOT Status
ExpiredMileage
84,590 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp levelling device inoperative (4.1.5 (a))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension mount (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
engine oil leak
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sill (7.1.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill/inner door aperture area (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sill (7.1.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect bulb in wrong (4.1.2 (c))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Tyre slightly damaged/cracking or perishing Spare (5.2.3 (d) (i))
Various points of corrosion around vehicle.
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner seal (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Tyre slightly damaged/cracking or perishing Spare (5.2.3 (d) (i))
Various points of corrosion around vehicle.
Nearside Front Inner Road wheel with a slightly distorted bead rim (4.2.A.1a)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords in tread (4.1.D.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Inner Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear (2.4.G.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
power steering fluid contaminated
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Passenger's seat cannot be secured in the upright position. (6.2.A.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Items removed from driver's view prior to test
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Items removed from driver's view prior to test
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front front brake binding (3.7.B.1)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front front brake binding (3.7.B.1)
Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
front brake discs badly worn
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
NB08 JPF is a 2008 Ford Ka in Grey with a 1,299cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 50%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying NB08 JPF, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of NB08 JPF?
You can check the full history of NB08 JPF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was NB08 JPF registered?
NB08 JPF is a 2008 Ford Ka, first registered on 31 July 2008.
Is NB08 JPF safe to buy?
The MOT history for NB08 JPF shows 20 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does NB08 JPF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on NB08 JPF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.