2006 Mercedes-benz C

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

all underbody corroded

handbreak efficency just met

Front Suspension arm ball joint has slight play both sides unable to see what arm need further investigating (5.3.4 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))

Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt dog leg arm (5.3.4 (b) (ii))

Offside Front Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Nearside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Play in steering rack inner joint(s)

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Outer Front suspension has excessive play in a lower suspension ball joint rear arm (2.5.B.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside front brake excessively fluctuating (3.7.B.3)

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Under-trays fitted obscuring some underside components

advise n/s/r tyre cracking on inner sidewall

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

advise n/s/r tyre cracking on inner sidewall

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)