2008 Toyota Aygo

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

NSR WHEEL ARCH CORRODED

Offside Front Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened sides (5.3.1 (b) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

NSR WHEEL ARCH CORRODED

Offside Front Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

nsr wheel arch corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

nsr wheel arch corroded

Nearside Rear Wheel arch corrosion

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Wheel arch corrosion

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

underbody covered in underseal

Axle swivel pins and bushes swivel pin and/or bush slightly worn rears (5.1.2 (b) (i))

Brake disc worn, pitted or scored, but not seriously weakened fronts (1.1.14 (a) (ii))

Brake pad(s) wearing thin fronts inner (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

corrosion on various suspension components

Emissions not tested (8.2.1.2 (d))

Nearside Brake pipe excessively corroded front to rear at the rear (1.1.11 (c))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Brake pipe excessively corroded front to rear at the rear (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Axle swivel pins and bushes swivel pin and/or bush slightly worn rears (5.1.2 (b) (i))

Brake disc worn, pitted or scored, but not seriously weakened fronts (1.1.14 (a) (ii))

Brake pad(s) wearing thin fronts inner (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

corrosion on various suspension components

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure 155/65/14 (4.1.D.1b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure 155/65/14 (4.1.D.1b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Brake pipe slightly corroded both front to rear's (3.6.B.2c)

Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

Items removed from driver's view prior to test

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)