2010 Honda Civic

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened both side (5.3.3 (b) (i))

Windscreen wiper blade defective (3.4 (b) (i))

both side rear under side sills surface corrosion

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened both side (5.3.3 (b) (i))

Windscreen wiper blade defective (3.4 (b) (i))

both side rear under side sills surface corrosion

Front Exhaust has a minor leak of exhaust gases part (6.1.2 (a))

Offside Front hub and suspension corroded

both side rear floorand side under skillsurface corrosion no holes at the time test

rear axle corrded

Front cross member corroded.

Offside Front suspension and hub corroded.

Rear axle corroded.

both side rear floor and side under sills surface corrosion ,no holes at the time test.

under trays fitted obscuring some components.

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Exhaust has a minor leak of exhaust gases emissions passed (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced underside and suspension components corroded , no holes or gaps within prescribed areas at time of test (6.1.1 (c) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced underside and suspension components corroded , no holes or gaps within prescribed areas at time of test (6.1.1 (c) (i))

Nearside Front Anti-roll bar ball joint excessively worn DROP-LINK (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint excessively worn DROP-LINK (5.3.4 (a) (i))

Front Exhaust has a major leak of exhaust gases AT DOWNPIPE (6.1.2 (a))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Position lamp not working (4.2.1 (a))

Rear Position lamp not working (4.2.1 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Under-trays fitted obscuring some underside components