2003 Rover 45

Coolant leak small leak from rear of engine area ()

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Upper Steering locking device missing castle nut split pin missing (2.1.3 (d))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Offside Front Upper Steering locking device missing castle nut split pin missing (2.1.3 (d))

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Fuel pipe leaking (6.1.3 (b) (i))

Nearside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))

Offside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Fuel tank exhaust shield missing where fitted as original equipment creating a risk of fire half missing (6.1.3 (e)) DANGEROUS

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

sill covers fitted

under side corroded all

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake pedal wearing smooth (1.1.2 (c))

Coil spring corroded all (5.3.1 (b) (i))

Fuel Pipe/s corroded under car to tank ()

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill and floor (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Suspension component pin or bush slightly worn trailing arm bushes (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge 3mm cracking in tread and wearing both edges (5.2.3 (e))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill and floor (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Rear Suspension component pin or bush slightly worn trailing arm bush (5.3.4 (a) (i))

plastic sill covers fitted

rear engine mount slight movement

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Brake pedal wearing smooth (1.1.2 (c))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Coil spring corroded all (5.3.1 (b) (i))

Fuel Pipe/s corroded under car to tank ()

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill and floor (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Suspension component pin or bush slightly worn trailing arm bushes (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge 3mm cracking in tread and wearing both edges (5.2.3 (e))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill and floor (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Rear Suspension component pin or bush slightly worn trailing arm bush (5.3.4 (a) (i))

plastic sill covers fitted

rear engine mount slight movement

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)