2006 Ford Focus C-max

Brake pad(s) wearing thin all (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

exhaust outer skins corroded

rear suspension arms corroded

washer bottle lid missing

Headlamp aim projected beam image is obviously incorrect headlamps faded (4.1.2 (c))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Shock absorbers insecurely attached (5.3.2 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault air bag lamp lit (7.1.6 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Brake pad(s) wearing thin all (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

exhaust outer skins corroded

rear suspension arms corroded

washer bottle lid missing

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Parking brake only just adequate. (Offside weak)

Nearside rear shock absorber barely working.

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside rear shock absorber barely working.

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

exhaust hanger corroded

exhaust system corroded

exhaust corroded

offside rear tyre tread slightly distorted