2007 Ford Ranger

Brake hose slightly deteriorated (1.1.12 (b) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner and outer sills (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s)

Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Brake hose slightly deteriorated (1.1.12 (b) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner and outer sills (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s)

Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner and outer sills (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s)

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner and outer sills (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

front bumper damaged

rear axle corroded

vehicle was covered with under seal

Suspension component pin or bush slightly worn various (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust emissions exceed manufacturer's specified limit 0.65 (8.2.2.2 (a))

Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer not working (3.5 (a))

Windscreen wiper not working (3.4 (a))

Suspension component pin or bush slightly worn various (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake pipe excessively corroded (3.6.B.2c)

Front Brake pipe excessively corroded to rear (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Inner Brake pipe excessively corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Inner Brake pipe excessively corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Headlamp aim too high (1.8)

Offside Rear wheel bearing has slight play (2.6.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)