MOT Status
ValidMileage
133,565 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Lower Gearbox mounting defective
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear bumper insecure
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Front Lower Gearbox mounting defective
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear bumper insecure
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced under body (6.1.1 (c) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced under body (6.1.1 (c) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened Bushes slightly worn (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened Bushes slightly worn (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Various suspension components corroded
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened Bushes slightly worn (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened Bushes slightly worn (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Various suspension components corroded
Offside Rear Tyre worn close to legal limit/worn on edge wearing out of shape (5.2.3 (e))
All brake pipes are corroding
Front and rear suspension components are corroded
Vehicle underneath corroded in places
Both front tyres worn on the inner edges
Front and rear suspension components are corroding
Rear brake discs are corroding and pitted
Vehicle underneath corroded in places
Both front tyres worn on the inner edges
Front and rear suspension components are corroding
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear brake discs are corroding and pitted
Vehicle underneath corroded in places
Both front suspension lower arms are corroding
Rear suspension components are corroded in places
Vehicle underneath corroded in places
Central Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Central Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Central Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Central Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Trailing arm front bush deteriorated
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Trailing arm front bush deteriorated
Rear subframe corroded
Vehicle corroded underneath in places
Vehicle rear suspension components corroded
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Vehicle suspension front and rear corroded
Vehicle underneath corroded in places
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Registration plate lamp not working (1.1.C.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Vehicle suspension front and rear corroded
Vehicle underneath corroded in places
Centre stop lamp not working
Rear Brake pad(s) wearing thin (3.5.1g)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Rear position lamp(s) not working (1.1.A.3b)
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
exhaust corroded
light cracking on all tyres
surface corrosion on all front and rear suspension components
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
exhaust corroded
light cracking on all tyres
surface corrosion on all front and rear suspension components
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
exhaust corroded
surface corrosion on all front and rear suspension components
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
NJ10 OFC is a 2010 Ford S-max in Black with a 2,179cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2010 Ford S-max models, the average MOT pass rate is 74.2% with a typical mileage of 83,408 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying NJ10 OFC, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 16 years old, this Ford S-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of NJ10 OFC?
You can check the full history of NJ10 OFC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was NJ10 OFC registered?
NJ10 OFC is a 2010 Ford S-max, first registered on 10 March 2010.
Is NJ10 OFC safe to buy?
The MOT history for NJ10 OFC shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does NJ10 OFC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on NJ10 OFC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.