2010 Toyota Auris

Exhaust mounting defective (6.1.2 (a))

Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms rear bushes (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms rear bushes (5.3.4 (a) (i))

Windscreen wiper blade defective both (3.4 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms rear bushes (5.3.4 (a) (i))

Brake pipe excessively corroded both front to rear flexis (1.1.11 (c))

Brake pipe excessively corroded both rear hub pipes (1.1.11 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Tyre tread depth below requirements of 1.6mm both front (5.2.3 (e)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms rear bushes (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Brake pipe corroded, covered in grease or other material both rear hub pipes (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))

Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms rear bushes (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Brake pipe corroded, covered in grease or other material both rear hub pipes (1.1.11 (c))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))

Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms rear bushes (5.3.4 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear heat shield insecure

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Central Rear heat shield insecure

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brakes imbalanced across an axle (3.7.B.5b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle (3.7.B.5b)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

1 exhaust centre bracket broken

corrosion on front brake discs [esp o/s]

front brake application uneven [not excessive]