2011 Citroen DS3

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Brakes imbalanced across an axle 60% o/s slower (1.2.1 (b) (i))

Central Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged sidewall (5.2.3 (d) (ii))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake fluctuating, but not excessively nearside/offside (1.2.1 (e))

brake pedal reserve travel

Central Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Central Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Registration plate inscription illegible (0.1 (b))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn d-bush (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush excessively worn d-bush (5.3.4 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen washer not working wipers not tested (3.5 (a))

Windscreen wiper not working (3.4 (a))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

coolant low

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front Tyre worn close to the legal limit both sides on inner and outer shoulders (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front Tyre worn close to the legal limit both sides on inner and outer shoulders (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

insufficient emissions to obtain print out.0.05

Windscreen washer provides insufficient washer liquid (8.2.3)

insufficient emissions to obtain print out.0.05

Advise: insufficient emissions to obtain print out.0.02

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Advise: insufficient emissions to obtain print out.0.02

Advise: nearside front tyre cracking on inner sidewall

Advise: offside front tyre damaged on outer sidewall,but cords not exposed

Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

exhaust system still supported but two hangers broke off