2006 Ford Ka

Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Coil spring worn (5.3.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Coil spring worn (5.3.1 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Windscreen wiper blade defective (3.4 (b) (i))

Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills (6.1.1 (c) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

general underbody corrosion

Under body corrosion

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill and inner wheel arch (5.3.6 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Tyre worn close to the legal limit 2.0mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit 2.4mm (4.1.E.1)

Subframe mounting prescribed area is corroded but not considered excessive both sides front (2.4.A.3)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Front Tyre worn close to the legal limit 2.0mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit 2.4mm (4.1.E.1)

Subframe mounting prescribed area is corroded but not considered excessive both sides front (2.4.A.3)

Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

both front tyres starting to crack

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

both rear tyres cracking

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

all three (3) wiperblades starting to smear

Child seat fitted not allowing full inspection of adult belt

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)