2013 Hyundai I10

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing inner side wall perished / cracking (5.2.3 (d) (ii))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure bulge in tread (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing inner side wall perished / cracking (5.2.3 (d) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material covered in grease / sealer (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material covered in grease / sealer (1.1.11 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Inner Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Brake pipe excessively corroded (1.1.11 (c))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Advise n/s/f tyre outer parts of tread scrubbed

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Items removed from driver's view prior to test ()

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to the legal limit worn on the inside edge (4.1.E.1)

Brake pedal spongy (3.3.B.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 25% (3.7.B.5b)

Offside Front Tyre worn close to the legal limit worn on the inside edge (4.1.E.1)

N S R tyre perished

O S F tyre wearing on inner edge

Rear wiper split

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Body has a sharp edge caused by damage Bumper (6.1.C.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

N S R tyre perished

O S F tyre wearing on inner edge

Rear wiper split