2002 Fiat Ducato

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Front Power steering pipe/hose has slight seepage Rack is leaking (2.1.5 (a))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner Wheel Arch (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner Wheel Arch (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Shock absorbers has slight external damage to the casing Both Corroded (5.3.2 (b))

advance corrision osf/ nsf inner wings

excess corrision/repair to osf chassis not strucutal

exhaust box damaged/dented

exhaust rubbers deteriorated

nsr shock absorber cover corroded/splitting

Nearside Headlamp aim too low (4.1.2 (a))

advance corrision osf/ nsf inner wings

excess corrision/repair to osf chassis not strucutal

exhaust box damaged/dented

exhaust rubbers deteriorated

nsr shock absorber cover corroded/splitting

front inner wheel arches corroded

Horn not working (7.7 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Electrical wiring insecure and connectors likely to become disconnected (4.11 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Electrical wiring insecure and connectors likely to become disconnected (4.11 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

front inner wheel arches corroded

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing in wheel arch (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Windscreen washer not working (3.5 (a))

Horn not working properly (7.7 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing in wheel arch (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

exhaust rubbers perished

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor/jacking point area (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor/jacking point area (6.1.1 (c) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 2 x front inner wings (6.1.B.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/f sill (6.1.B.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Brake pipe leaking (3.6.A.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake slightly binding

Rear Rear wheel bearing has slight play both (2.6.2)

Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc both (2.5.C.1a)

Horn not working (1.6.2a)

Steering column top mounting bracket insecure (2.1.2d)

Offside Front brake slightly binding

Rear Rear wheel bearing has slight play both (2.6.2)

Front registration plate deteriorated (6.3.1d)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Registration plate lamp not working (1.1.C.1d)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Registration plate lamp not working (1.1.5c)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Headlamp not working on main beam (1.7.5a)

Offside Registration plate lamp not working (1.1.5c)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Registration plate lamp not working (1.1.5c)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim too high (hotspot upper edge above the horizontal 0% line) (1.6.D1)

Offside Front Headlamp aim too high (hotspot upper edge above the horizontal 0% line) (1.6.D1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)