2002 Mazda Premacy

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Inner Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt top and bottom (2.4.G.2)

Offside Front Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Nearside Front Tyre worn close to the legal limit inner tread surface (4.1.E.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded sill to floor excess corrosion (5.2.6)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords outer wall (4.1.D.1a) DANGEROUS

Nearside Front Tyre worn close to the legal limit inner tread surface (4.1.E.1)

BOTH FRONT TYRES WORN ON INNER EDGE

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Tin protection plate on rear brakes corroded, offside rear and nearside, ok at this time.

Auxiliary drive belt not aligned correctly and damaged

Excessive corrosion under vehicle at offside rear but not within any prescribed areas

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Auxiliary drive belt not aligned correctly and damaged

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

ADVISE N/S +O/S OUTER SILLS CORRODED

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

ADVISE N/S +O/S OUTER SILLS CORRODED

ADVISE SCREW ON N/S/F TYRE ON INNER SHOULDER

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc excessively pitted (3.5.1h)

Offside Front brake disc excessively pitted (3.5.1h)

front brake application uneven (3.7.B.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Front brake disc slightly pitted (3.5.1h)