2003 Aprilia RS125

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Wheel bearing has slight play Very slight play in rear wheel bearing (5.1.3 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Rear Brake pedal has insufficient reserve travel Adjusted (1.1.2 (a))

Rear Wheel bearing has slight play Very slight play in rear wheel bearing (5.1.3 (a) (i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings are slightly rough (2.3.5b)

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

gear lever pivots slightly worn

nearside riders footrest bracket slightly bent,causing rear brake hose to be chafing where it meets swingarm

sidestand pivot slightly worn

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Direction indicator flashing more than 120 times per minute (1.5.1c)

Drive chain excessively tight (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp aim too low (1.6)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Wheel alignment slightly misaligned. (2.5.1)

gear lever pivots slightly worn

nearside riders footrest bracket slightly bent,causing rear brake hose to be chafing where it meets swingarm

sidestand pivot slightly worn

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))