2006 Nissan Almera

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge Inner tread edge worn. (5.2.3 (e))

Coil spring corroded all 4 (5.3.1 (b) (i))

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Sub-frame corroded but not seriously weakened both, front and rear (5.3.3 (b) (i))

rear axle corroded

Central Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Front Brake hose slightly deteriorated Both (1.1.12 (b) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component pin or bush slightly worn Rear track control arm (5.3.4 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Central Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Front Brake hose slightly deteriorated Both (1.1.12 (b) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component pin or bush slightly worn Rear track control arm (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

front discs pitted

exhaust has slight blow at joint

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brakes imbalanced across an axle (3.7.B.5b)

front brake application uneven (3.7.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)