2002 Honda VFR800

Headlamp aim too high (4.1.2 (a))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too high (4.1.2 (a))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brake excessively binding (1.2.1 (f))

Rear Position lamp not working (4.2.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too high (4.1.2 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brake excessively binding (1.2.1 (f))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever bent (6.2.7 (b))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Road spring corroded (5.3.1 (b) (i))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever bent (6.2.7 (b))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Road spring corroded (5.3.1 (b) (i))

Stop lamp not working (4.3.1 (a) (ii))

Clutch lever bent (6.2.1g)

Exhaust slightly deteriorated corrosion on manifold and centre sections (7.1.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm tyre tread heavily distorted (4.1.3(ii))

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Clutch lever bent (6.2.1g)

Exhaust slightly deteriorated corrosion on manifold and centre sections (7.1.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Clutch lever bent.

Front Brake lever bent.

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Clutch lever bent.

Drive chain worn but not considered excessive Chain also Corroded. (6.2.1e)

Front Brake lever bent.

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Clutch lever bent .

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre tread slight uneven wear

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Drive chain fouling another component (6.2.1d)

Drive chain worn to excess (6.2.1e)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Drive chain excessively loose (6.2.1d) DANGEROUS

Clutch lever bent .

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread slight uneven wear

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

clutch lever bent . both headlamp aims set on upper limit .

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Offside Front shock absorber seal failed and leaking oil (2.3.3)