MOT Status
ExpiredMileage
111,739 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii))
Brake pipe corroded, covered in grease or other material some metal pipes (1.1.11 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Inner wheel rim slightly damaged
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust system insecure (6.1.2 (a))
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Rear Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a))
Coil spring corroded all 4 coil springs corroded (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread damaged (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Items removed from driver's view prior to test mirror hanger ()
Nearside Front Road wheel slightly distorted inner rim (5.2.2 (c) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing cracking/perished (5.2.3 (d) (ii))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced axle mounting area (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge at 1.6mm minimum and inner edge at 0mm (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing cracking/perished (5.2.3 (d) (ii))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced axle mounting area (6.1.1 (c) (i))
Rear Shock absorbers has slight external damage to the casing both rear shock bodies heavily corroded (5.3.2 (b))
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Rear Mechanical brake component has restricted free movement brake dragging when wheel turned and sticking on (3.5.1k)
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pipe excessively corroded to rear (3.6.B.2c)
Offside Front Brake pipe excessively corroded to rear (3.6.B.2c)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
both front wheels showing signs of damage
engine warning light on dash
small cuts in offside front tyre sidewall
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Windscreen wiper blade insecure (8.2.2)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
both front wheels showing signs of damage
engine warning light on dash
small cuts in offside front tyre sidewall
wiper smearing but clearing ok
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres cracking on sidewall
engine management lamp on
o/s headlamp retaining bolt missing but secure
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres cracking on sidewall
engine management lamp on
o/s headlamp retaining bolt missing but secure
Nearside Front Valve stem seriously misaligned (4.1.D.1e)
both rear tyre s cracking tread
engine mangement light on
front discs corroded
both rear tyre s cracking tread
engine mangement light on
front discs corroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
NL06 HBX is a 2006 Toyota Aygo in Red with a 998cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying NL06 HBX, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of NL06 HBX?
You can check the full history of NL06 HBX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was NL06 HBX registered?
NL06 HBX is a 2006 Toyota Aygo, first registered on 10 March 2006.
Is NL06 HBX safe to buy?
The MOT history for NL06 HBX shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does NL06 HBX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on NL06 HBX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.