MOT Status
ExpiredMileage
89,292 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material Going to offside rear wheel cylinder (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both inner and outer sills (7.1.1 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both nearside and offside floors (7.1.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both inner and outer sills (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both rear floors (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material Going to offside rear wheel cylinder (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both inner and outer sills (7.1.1 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both nearside and offside floors (7.1.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both inner and outer sills (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both rear floors (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Windscreen washer not working (3.5 (a))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mount (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mount (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear axle showing signs of corrosion but not seriously weakend
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust emissions exceed manufacturer's specified limit 1.50 (8.2.2.2 (a))
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill section corroded and holed (6.2.2 (d) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust emissions exceed manufacturer's specified limit 1.50 (8.2.2.2 (a))
Nearside Front Brake pipe excessively corroded to rear (1.1.11 (c))
Offside Front Brake pipe excessively corroded to rear (1.1.11 (c))
Front Items removed from driver's view prior to test ()
Front Items removed from driver's view prior to test ()
Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Inner Brake pad(s) wearing thin (3.5.1g)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Headlamp aim too low (1.8)
Nearside Front Valve stem seriously damaged (4.1.D.1e)
Nearside Rear Valve stem seriously damaged (4.1.D.1e)
Both rear tyre's cracking through tread and side walls
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
NL06 SSJ is a 2006 Toyota Aygo in Grey with a 998cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying NL06 SSJ, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of NL06 SSJ?
You can check the full history of NL06 SSJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was NL06 SSJ registered?
NL06 SSJ is a 2006 Toyota Aygo, first registered on 6 March 2006.
Is NL06 SSJ safe to buy?
The MOT history for NL06 SSJ shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does NL06 SSJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on NL06 SSJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.