2004 Subaru Forester

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive cross member mounting points (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

front exhaust bracket broken

rear exhaust system corroded

chassis and body corroded

mil light illuminated

slight knock on suspension on road test

Battery insecure (1.9.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases 2nd cat (7.1.2)

mil light illuminated

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

offside front brake sticking on

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

low effort on offside rear foot brake

nearside front traack rod end split pin missing

slight oil leak from dipstlck tube area

slight run out on offside front brake disc

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

low effort on offside rear foot brake

nearside front traack rod end split pin missing

offside front brake sticking on

slight oil leak from dipstlck tube area

slight run out on offside front brake disc

Exhaust has a minor leak of exhaust gases (7.1.2)

ems light on

exhaust system carroded

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS

Offside Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

engine management light on

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage missing (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)