2006 Subaru Forester

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroded (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill corroded (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroded (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill corroded (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroded (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill corroded (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroded (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill corroded (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside weld repairs covered in under seal

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside weld repairs covered in under seal

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

under side corroded

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

general underbody & suspension corrosion

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Service brake grabbing slightly (1.2.1 (c))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Service brake grabbing slightly (1.2.1 (c))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Both rear tyres rubber perishing slightly and offside rear has a nail/stud in it.

Slight rattle/wear noise on front suspension but no obvious wear found at time of test.

NSF wiper blade split at edge

Nearside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

OSF tyre wearing thin on inner edge

Offside Rear Registration plate lamp not working (1.1.C.1d)

NSF wiper blade split at edge

Nearside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

OSF tyre wearing thin on inner edge

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nail in nearside rear tyre

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit (4.1.E.1)

rear no plate damaged