2008 Honda Civic

Brake lever excessively worn handle broken (1.1.15 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Exhaust system insecure (6.1.2 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material flex pipe furrels (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

nearside front tyre worn on inner edge

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

nearside front tyre worn on inner edge

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Tyre tread depth below requirements of 1.6mm n/s front (4.1.E.1)

Tyre tread depth below requirements of 1.6mm o/s front (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)