1997 Ford Fiesta

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Offside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Body has a sharp edge caused by corrosion sill (6.1.C.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner (6.1.B.2)

Offside Rear Body has a projection caused by corrosion sill (6.1.C.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Front Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch/turret (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded floor area (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch/turret (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/f sill slightly corroded

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside rear brake recording little or no effort (3.7.B.5a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/f sill slightly corroded

o/s/f tyre slightly perished

Front registration plate deteriorated (6.3.1d)

Service brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Spare wheel carrier insecure (6.4.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Service brake: efficiency below requirements (3.7.B.7)

Hazard warning switch faulty (1.4.B.1d)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

steering joint dust cover split/missing