2005 Toyota Corolla

Headlamp has a product on the lens so that the light output is severely reduced nearside and offside no beam aim (4.1.4 (b))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded by jacking point and by close to chassis under lower seal (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (front to rear) by jacking point by chassis and lower seal all corroded (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame is corroded but structural rigidity is not significantly reduced build up corrosion to all suspension components nearside and offside (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear axle build up corrosion to all suspension components nearside and offside

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp has a product on the lens but not seriously reducing light output offside+nearside (4.1.4 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front fog lamp not working

Rear Wheel bearing has slight play offside+nearside (5.1.3 (a) (i))

Rear Wheel bearing slightly noisy offside+nearside (5.1.3 (b) (i))

Rear axel build up corrosion

offside front + offside rear ripered covered with black paint

several corrosion build up under neath

Front subframe corroded but not seriously weakened

Headlamp has a product on the lens but not seriously reducing light output nearside+offside (4.1.4 (b))

Rear axle corroded

intergral body structure is corroded butstructural rigidity is not significantly reduced

suspension component mounting repair covered in underseal

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

rear axle corroded

Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear axle corroded

Front Tyre worn close to legal limit/worn on edge o/s & n/s (5.2.3 (e))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Rear bushes split

vehicle very corroded

Brake pedal has insufficient reserve travel Handbrake (1.1.2 (a))

Headlamp not working on dipped beam Cover sills fitted (4.1.1 (a) (ii))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front and rear inner sill near suspension and jacking point (5.3.6 (a) (i))

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Front (1.2.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge o/s & n/s (5.2.3 (e))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Rear bushes split

vehicle very corroded

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced CENTRE FLOOR (7.1.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

n/s and o/s body sills obscured by covers

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)